|
Navigation
|
Front Page |
Forum |
Gallery |
Wiki |
|
|
12-04-2015, 11:18 PM
|
#31
|
Hamster Overlord
Join Date: Apr 2015
Location: San Francisco, California
Posts: 643
|
Re: Guide to suitable hamster Wheels
Hi Bertie,
I had to fiddle with mine a bit, and found that putting it near a corner for support from the vertical bars from the rear and side of the cage helped significantly. Also I tried to set the base on the highest bars and tie wrap them where the vertical/horizontal bars and the metal base all conjoined. I made sure the base was strapped to the high bars. (if that makes any sense). Also I put olive oil on the small black plastic washers on the front and back of the wheel. Hope this helps. They're great wheels.
|
|
|
12-06-2015, 09:05 PM
|
#32
|
Senior Hamster
Join Date: Sep 2014
Location: North America, USA
Posts: 539
|
Re: Guide to suitable hamster Wheels
I don't really know what you mean Doesn't really matter
__________________
Personally owned by Scarlet. Please check out Scarlet's Thread!
|
|
|
12-07-2015, 01:41 AM
|
#33
|
Hamster Overlord
Join Date: Aug 2015
Location: Sussex, UK
Posts: 744
|
Re: Guide to suitable hamster Wheels
Thanks virtual Keith! I've kind of got it fixed like yours. Problem is that the stand sticks out across the large doorway in the top of my cage, I think that's making it a bit noisy but it doesn't matter as I'm not disturbed by it. I don't want to rearrange the cage as Nibble doesn't like change lol
|
|
|
12-07-2015, 05:38 AM
|
#34
|
Hamster Antics
Join Date: Sep 2014
Posts: 23,533
|
Re: Guide to suitable hamster Wheels
Does that block the top doorway then BB? The stands are quite large on the Wobust. I agree about not changing it for now. A couple of cable ties could help stop the rattle - eg if you now can't use the top door use a cable tie on that maybe. Having not actually seen a Barney, I wasn't sure if the Wobust stand would fit without blocking the top door so had planned to get this instead - although they're not cheap! About £15 and postage is £7.
https://www.rodipet.de/shop/laufraed...cm-wobust.html
|
|
|
03-14-2016, 07:06 AM
|
#35
|
Moderator
Join Date: Nov 2005
Location: Yorkshire, UK but my heart lies in Scotland!
Posts: 28,196
|
Re: Guide to suitable hamster Wheels
Is the Trixie wheel running part (the actual wheel) a solid plastic 'bowl' construction or is there a running track with a joining strip? We cannot get Azula to stop just chewing the joining bar then the track to destruction on the wodent wheels ! We need something that is solid all round so she can't chew it!!
|
|
|
03-14-2016, 08:39 AM
|
#36
|
Hamster Antics
Join Date: Sep 2014
Posts: 23,533
|
Re: Guide to suitable hamster Wheels
I can't remember as didn't have mine long and it arrived put together - someone else is bound to know. So Azula is a little chewer lol!
|
|
|
03-14-2016, 08:59 AM
|
#37
|
Moderator
Join Date: Nov 2005
Location: Yorkshire, UK but my heart lies in Scotland!
Posts: 28,196
|
Re: Guide to suitable hamster Wheels
she is a nightmare - she has everything a hamster could want and is out every night - she is always so pleased to have her wheel back after repair. Looks like she is having a great run then by morning she has chewed it again. It is beyond repair now!!
|
|
|
03-14-2016, 11:21 AM
|
#38
|
Hamster Antics
Join Date: Sep 2014
Posts: 23,533
|
Re: Guide to suitable hamster Wheels
I guess there are the Karlie wood wheels, but then you'd need to keep sanding the bits she's chewed!
I've just remembered what the Trixie wheel is like - the back and side pieces are all one pieces and the front is a separate piece that pulls off. So there's no join at the back but there is at the front.
|
|
|
03-14-2016, 03:09 PM
|
#39
|
Moderator
Join Date: Nov 2005
Location: Yorkshire, UK but my heart lies in Scotland!
Posts: 28,196
|
Re: Guide to suitable hamster Wheels
sounds like a possibility as it is the join in the track she goes for not the entry holes!! I may risk it and order one!
|
|
|
03-14-2016, 03:20 PM
|
#40
|
Hamster Antics
Join Date: Sep 2014
Posts: 23,533
|
Re: Guide to suitable hamster Wheels
Well I guess there'd be a join at the front where the front piece clips on but not quite the same as the join of the running track I think. I found it ok - a bit flimsy but ok. I didn't keep it because it's about the same depth as the wodent wheel and Charlie is so chunky I thought his fur would get rubbed off lol.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
|
All times are GMT -7. The time now is 05:38 PM.
|
|
|
|