|
Navigation
|
Front Page |
Forum |
Gallery |
Wiki |
|
07-20-2016, 07:31 PM
|
#1
|
Newborn Pup
Join Date: Nov 2015
Posts: 11
|
Bin Cage: Wire grate inside or Out
I've put together a bin cage for our Syrian Hammy that will be a nighttime playpen.
The sides have large ventilation windows that are covered by the wire grate from a small rodent cage.
I mounted the wire grate on the outside of the bin, but now that I look at it, I am wondering if the grate should be on the inside of the cage.
Any thoughts?
|
|
|
07-20-2016, 07:44 PM
|
#2
|
Newborn Pup
Join Date: Nov 2015
Posts: 11
|
Re: Bin Cage: Wire grate inside or Out
image.jpg
Here's a picture
|
|
|
07-20-2016, 07:51 PM
|
#3
|
Adult Hamster
Join Date: Oct 2013
Location: Minnesota
Posts: 264
|
Re: Bin Cage: Wire grate inside or Out
I would leave it on the outside- on the inside it gives a good chance that the hamster could chew at it. If you wanted to make it look better, you can put duct tape on the edges do it looks more complete.
|
|
|
07-21-2016, 01:20 AM
|
#4
|
Newborn Pup
Join Date: Nov 2015
Posts: 11
|
Re: Bin Cage: Wire grate inside or Out
Screen Shot 2016-07-21 at 1.18.32 AM.jpg
I found a YouTube video of a hamster that chewed his way out of a bin cage when the wire mesh was on the outside.
Anyone else have this happen?
|
|
|
07-21-2016, 01:23 AM
|
#5
|
Newborn Pup
Join Date: Nov 2015
Posts: 11
|
Re: Bin Cage: Wire grate inside or Out
Here's another shot of our setup.
image.jpg
|
|
|
07-21-2016, 12:32 PM
|
#6
|
Moderator
Join Date: Jul 2010
Location: Southampton, UK
Posts: 4,577
|
Re: Bin Cage: Wire grate inside or Out
I always put the mesh on the inside of the bin cage to prevent access to the cut plastic edges. They can be sharp and also can be chewed to make an escape route!
__________________
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
|
All times are GMT -7. The time now is 04:54 AM.
|
|
|
|