Need inspiration for zoozone layout - Page 4

Pebbles82 · 02-09-2016, 05:35 AM

I know, that's what makes it more expensive as well. It hurt paying for it but I'm very pleased with it as I've had a lot of hassle with wheels in the last year! I'm just finishing a video review if you want to see more detail on it, I'll post it on HC when I've finished it.

hammy2 · 02-09-2016, 08:53 AM

I'll check that out then

x

CMB · 02-09-2016, 12:05 PM

The setup looks OK to me. One thing I would try is to turn the platforms 90 degrees and see if both side by side would fit along the longest side as one platform.

hammy2 · 02-09-2016, 12:17 PM

That sounds a great idea! Hope it fits

CMB · 02-09-2016, 02:42 PM

If they fit then one support underneath the join would hopefully be enough.

hammy2 · 02-09-2016, 02:59 PM

there's a bit of an overlap but it works

thanks

CMB · 02-10-2016, 01:58 AM

Your welcome.

A chube or 2 will be enjoyed by your hamster. A bendy bridge or rough rock will help the hamster reach the water bottle. Or deep substrate.

If the flying saucer is used well by the hamster you could remove the wheel to open up the space.

I prefer wheels as they are upright and take up less space.

Possibly take 1 ladder out or does it help support the shelf.?

hammy2 · 02-10-2016, 04:14 AM

I was thinking about a bendy bridge where the water bottle is and don't like how the ladder is where it overlaps. It's well supported

flowerfairy · 02-10-2016, 05:20 AM

Its looking good. Cant wait to see it when its occupied.

CMB · 02-10-2016, 06:05 AM

Is that a wooden house under the shelf or a flat bendy bridge?

Have you glued the join on the shelf?

You could turn the left platform over and see if the ladder could bend the other way to give a ladder at each end of the shelf.