Register FAQ Calendar Today's Posts Search
Navigation
Front Page
Forum
Gallery
Wiki

Ads by Google


Go Back   Hamster Central > Hamster Central Forum Topics > Housing

Notices

Reply
 
Thread Tools Display Modes
Old 11-20-2012, 09:34 AM   #1
Sandti
PM Fluffy for custom title
 
Sandti's Avatar
 
Join Date: Jun 2012
Location: UK, Biggleswade
Posts: 1,767
Default Meshing a Zoozone cage?

Hey guys,
I'm planning to get a Zoozone cage in the future and I know that they need to be meshed. Can you post pictures of the top of your cages so that I can see what mesh you have used and maybe if you could link the type of mesh you used and where you can buy it from etc.

Thanks :3
__________________
Hammies Syrian: unnammed <3 Rainbow Bridge : Zoro ♀ Teemo ♂ WinterWhite: Pepper ♀http://desmond.imageshack.us/Himg37/...ng&res=landing
Sandti is offline   Reply With Quote
Old 11-20-2012, 09:49 AM   #2
jesselle
hearts dwarf hams
 
jesselle's Avatar
 
Join Date: Jul 2012
Location: St. Albans
Posts: 2,549
Default Re: Meshing a Zoozone cage?

who might you be keeping your future zoozone?

i've kept my russians in them without mesh and with toys that reach about 15/16cms tall. no escapes! my robo is in an unmeshed one now, no escapes.

just to put it out there! x
__________________

Coco 02/11/12
Sleep tight Wonton 12/08/11-18/11/12, Emilio 20/01/12-27/06/14, Kiwi 03/12/11-23/07/14 & Haku 14/01/13-16/01/15
jesselle is offline   Reply With Quote
Old 11-20-2012, 09:50 AM   #3
kyrilliondaemon
Retired Moderator
 
kyrilliondaemon's Avatar
 
Join Date: Jun 2011
Location: Aberystwyth
Posts: 16,105
Default Re: Meshing a Zoozone cage?

We just use 1cm or 6mm square mesh for any meshing. We buy most of it from a local garden centre, some from Charlies and some from B&Q.
None of our photos show the lids very well but we literally cut the mesh to the right size and cable tied it on.

This sort of stuff - Galvanised Mesh (13mm &#215; 13mm) Panel - 0.6m &#215; 0.9m, 5397007006568
And in giant roll form (which we do actually have at the moment) - Mesh - Galvanised 6m x 0.9m x 13mm, 5397007007107

A single sheet will be plenty though
__________________
kyrilliondaemon is offline   Reply With Quote
Old 11-20-2012, 10:26 AM   #4
GhostsInSnow
Moderator
 
GhostsInSnow's Avatar
 
Join Date: Jul 2012
Location: West midlands, UK
Posts: 3,248
Default Re: Meshing a Zoozone cage?

Fudge is temporarily in a ZooZone 1 so I used 13mm mesh. It was the smallest I could get from B&Q and we went to all our other local DIY stores and couldn't find any smaller.
Here's a link: http://www.diy.com/nav/garden/fencin...skuId=12498593
My mum thought I wouldn't need to mesh it but Fudge proved her wrong when I was halfway through haha


Anyway, here's a picture:
ZooZone Mesh.jpg

I meshed it in 3 sections (between the vertical bars) simply because it made it easier.
When I kept mice in my other ZooZone, I used the same mesh but double meshed it. If you're gonna be keeping tiny hams in there, I'd definitely try and got for smaller mesh.

Meshing one once was enough for me, having to do it twice was a nightmare xD
__________________


GhostsInSnow is offline   Reply With Quote
Old 11-20-2012, 10:29 AM   #5
leedsgurl
Moderator
 
leedsgurl's Avatar
 
Join Date: Mar 2008
Location: Leeds, West Yorkshire
Posts: 3,348
Default Re: Meshing a Zoozone cage?

There's some great instructions on various threads, here are the ones I've found:

Zoozone ideas and adaptations

Meshing Zoozone 1
leedsgurl is offline   Reply With Quote
Old 11-20-2012, 02:05 PM   #6
cathface
PM Fluffy for custom title
 
cathface's Avatar
 
Join Date: Dec 2011
Location: London
Posts: 1,400
Default Re: Meshing a Zoozone cage?

oh man I tell you what, meshing a ZZ was lethal haha. I destroyed my forearms and hands just because I wasn't careful enough with the mesh! I just used more from my massive roll from Wilkos, which was like £5 or something? 13mm. the mesh is kept rolled with a long length of extra wire, of which I snipped some off and twisted it round the mesh and the cage lid. had to improvise because I just couldn't find cable ties anywhere?!?! then because every time I had to remove the lid I would cut myself on the mesh underneath, even though I'd trimmed as close to the edges of the mesh as possible, I put masking tape around the edges I touch, which is what the white thing is lol.

__________________
http://i1214.photobucket.com/albums/...eah/hamsig.png
*Badger, Burglar & Luigi on Tumblr
(warning: possible mature language use)
cathface is offline   Reply With Quote
Old 11-20-2012, 02:23 PM   #7
kyrilliondaemon
Retired Moderator
 
kyrilliondaemon's Avatar
 
Join Date: Jun 2011
Location: Aberystwyth
Posts: 16,105
Default Re: Meshing a Zoozone cage?

Ebay has tons of cable ties at 99p for 100

And yeah... I'm prone to silly injuries so we have a rule that my OH deals with mesh at first. We both know I'd end up the first person on HC in A&E for stitches just from cutting mesh or something lol
I attatch it sometimes but he cuts it. I did still attatch myself to Dusty's cage yesterday though... Came into the room to be told my phone was going so didn't watch the cage close enough. Ended up detatching the mesh from my trouser pocket while on the phone lol
__________________
kyrilliondaemon is offline   Reply With Quote
Old 11-20-2012, 02:36 PM   #8
cathface
PM Fluffy for custom title
 
cathface's Avatar
 
Join Date: Dec 2011
Location: London
Posts: 1,400
Default Re: Meshing a Zoozone cage?

Quote:
Originally Posted by kyrilliondaemon View Post
Ebay has tons of cable ties at 99p for 100

And yeah... I'm prone to silly injuries so we have a rule that my OH deals with mesh at first. We both know I'd end up the first person on HC in A&E for stitches just from cutting mesh or something lol
I attatch it sometimes but he cuts it. I did still attatch myself to Dusty's cage yesterday though... Came into the room to be told my phone was going so didn't watch the cage close enough. Ended up detatching the mesh from my trouser pocket while on the phone lol
oh I needed them like immediately because I'd already sold the tank and the person was coming to collect the next day, but I'd only just brought the ZZ home! couldn't find them in Homebase but then again there were literally no staff to ask either. I looked in every aisle twice and then floundered a bit, hoping someone might take pity, but no one did as it was really busy.

and gosh yeah I think I've ruined a pair of my jeans already, there are threads coming out of it because they've been hooked onto the mesh, pre-masking tape...
__________________
http://i1214.photobucket.com/albums/...eah/hamsig.png
*Badger, Burglar & Luigi on Tumblr
(warning: possible mature language use)
cathface is offline   Reply With Quote
Old 11-20-2012, 02:37 PM   #9
kyrilliondaemon
Retired Moderator
 
kyrilliondaemon's Avatar
 
Join Date: Jun 2011
Location: Aberystwyth
Posts: 16,105
Default Re: Meshing a Zoozone cage?

Ah ok that makes sense then. Its a shame you couldn't find any. Poundland sells them and probably other places too...

Er... Thats quite bad. Fortunately my OH is good with mesh so I have to be really silly to get stuck on the stuff. Which I was yesterday. Didn't hurt the trousers though
__________________
kyrilliondaemon is offline   Reply With Quote
Old 11-20-2012, 04:31 PM   #10
GhostsInSnow
Moderator
 
GhostsInSnow's Avatar
 
Join Date: Jul 2012
Location: West midlands, UK
Posts: 3,248
Default Re: Meshing a Zoozone cage?

I had problems meshing too. I cut my hands to pieces doing Fudge's cage at the weekend (and hurt my hand on the cutter things when cutting the mesh)
I got my cable ties from Ebay. Pink ones because I wanted a pink and black theme, but then she had to have her flying saucer back and it ruined the colour scheme we had going xD

Anyway, I'd advise anyone meshing a ZooZone to wear gloves xD and long sleeves too haha
__________________


GhostsInSnow is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO v2.0.43 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2003-2022, Hobby Solutions
All times are GMT -7. The time now is 06:44 AM.