Register FAQ Calendar Search Today's Posts Mark Forums Read
Navigation
Front Page
Forum
Gallery
Wiki

Ads by Google


Go Back   Hamster Central > Hamster Central Forum Topics > DIY (Do it yourself) Hamster Projects!

Notices

Reply
 
Thread Tools Display Modes
Old 12-25-2018, 12:07 AM   #1
beepbeep
 
Join Date: Dec 2018
Posts: 1
Cool DIY wheel, how to attach wheel to aquarium

Hello! I’m new here and I haven’t owned my hamster for long, but I have owned rats for a year and a half now so I know a little bit! Anyway, I wanted to share some thoughts and ideas! A little backstory...
my hamster has two cages: a wire cage and an aquarium. I’m considering using the aquarium as a travel cage and the wire cage as an everyday cage, as the wire cage is much larger than the aquarium. My theme for the wire cage is wood and natural things in general and my theme for the aquarium is mostly clear acrylic things. Today, I will be discussing the aquarium.

The Wheel

I was having the hardest time finding a clear wheel that was the proper size, so I decided to make one! I considered getting a large plastic food container and cutting it, but I instead decided to find something already made from acrylic to match the theme. I also considered making or buying a stand, but one thing I didn’t like about my hamster’s current wheel (Wodent Wheel) was length of the stand. She often pushed bedding under the wheel and it would get stuck, so I wanted to figure out some way to attach it to the aquarium above the bedding. I also wanted to be able to take it out for cleaning. Hopefully the pictures will help explain some things if this gets confusing. The cake cover has some sort of handle thing going on in the middle where it plateaus. What I actually added is the suction cup and the clear circle under which it's attached to. The wheel is 11.78" in width.

WHAT I USED:
a container
a fidget spinner
a strong suction cup with hook
super glue
a craft knife
optional:
clear scotch tape
pliers

Because I wanted all of my wheel to be clear, I decided on a clear fidget spinner. I removed the ball bearing and its covers. I was then left with the parts needed to make it spin. With a craft knife, I slowly cut a hole in the cake cover which was the exact width of the ball bearing. I made sure it fit snug. Then, I superglued the ball bearing to the cake cover. Next, I sandwiched the covers together through the ball bearing (the inside piece later came off but the wheel was unaffected because the ball bearing was superglued). I covered it with scotch tape for safety. Using pliers, I bent the hook of the suction cup to be parallel with the cage instead of perpendicular, and hooked the ball bearing cover on. Finally, I attached it to the aquarium!
Attached Images
File Type: png Screen Shot 2018-12-25 at 1.00.17 AM.png (61.2 KB, 29 views)
File Type: png Screen Shot 2018-12-25 at 12.55.28 AM.png (109.0 KB, 29 views)
beepbeep is offline   Reply With Quote
Old 12-25-2018, 12:08 PM   #2
alpacassei
PM Fluffy for custom title
 
alpacassei's Avatar
 
Join Date: Nov 2016
Location: Cornwall, UK
Posts: 1,109
Default Re: DIY wheel, how to attach wheel to aquarium

The running track looks like it’s at a quite an angle, can your hamster run on it alright without falling off?
__________________
<3 Sunflower Custard, Bigfoot, Petal, Stormy, Flurry, Vanilla <3
___________
Angel hamsters: Francisco, Marcello, Peppermint, Mishka, Stephano, Sundae, Peach <3
alpacassei is offline   Reply With Quote
Old 12-25-2018, 05:04 PM   #3
Pebbles82
Hamster Antics
 
Join Date: Sep 2014
Posts: 23,533
Default Re: DIY wheel, how to attach wheel to aquarium

That is amazing What a great idea to use a fidget spinner as the spin mechanism. I can't see the angle of the running track well on the photos but maybe it is just the angle of the photo? Looks like a bucket wheel.
Pebbles82 is offline   Reply With Quote
Old 12-25-2018, 05:05 PM   #4
Pebbles82
Hamster Antics
 
Join Date: Sep 2014
Posts: 23,533
Default Re: DIY wheel, how to attach wheel to aquarium

See what alpacassei means now - the slope looks like it points downwards from the inner to the outer part of the running track. May just be the angle of the photo though? If it is a bit of an angle, maybe a different cake container would work.

Actually I'd be a bit concerned about the suction cup coming off while the hamster was in the wheel.
Pebbles82 is offline   Reply With Quote
Reply

Tags
wheel, aquarium, cage, bearing, ball, clear, wire, wanted, cover, cup, suction, theme, things, cake, decided, make, bedding, pliers, tape, scotch, knife, spinner, made, fidget, stand

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO v2.0.43 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2003-2022, Hobby Solutions
All times are GMT -7. The time now is 01:14 AM.