Register FAQ Calendar Search Today's Posts Mark Forums Read
Navigation
Front Page
Forum
Gallery
Wiki

Ads by Google


Go Back   Hamster Central > >

Notices

Reply
 
Thread Tools Display Modes
Old 11-14-2017, 02:52 PM   #1
Cricetinae
Hamster Pup
 
Cricetinae's Avatar
 
Join Date: May 2013
Location: West Midlands, UK.
Posts: 95
Default 2017 DIY Cage Project, Mounting Plexy?

Hi guys,

I'm in the process of creating a DIY cage using melamine faced chipboard. Nothing too original, borrowing from other a number of ideas online. I intend to mount in on castors for quick moving, whilst hoovering. The cubby-hole's are designed to snugly accomodate IKEA storage boxes. The face is plexy.



However, I'm not sure how to mount the 4mm plexy. A having the plexy rest flush on the face is the goal.

My concern with drilling, is that the chipboard is only 15mm wide. To mount the plexy flush with the chipboard would require drilling around 7mm from the edge of the plexy, causing cracking. I considered having the plexy 30mms longer than the length of the cage, and drilling a safer ~20mm from the edge. However, I'm worried this 15mm overhang each side would ruin the aesthetics.

I was looking at an epoxy, but apparently the melamine face doensn't adhere well? I suppose I could sand up the faces, but given the transparency of the plexy, you'd see this.

Has anyone found any brackets or similar items that have worked for their own projects?
__________________

Last edited by Cricetinae; 11-14-2017 at 03:01 PM.
Cricetinae is offline   Reply With Quote
Old 11-14-2017, 04:08 PM   #2
AmityvilleHams
PM Fluffy for custom title
 
Join Date: Mar 2016
Posts: 3,605
Default Re: 2017 DIY Cage Project, Mounting Plexy?

You might be able to use some sort of screws to attach the acrylic to the melamine.Aquarium sealant would not be an option(it doesn't bond properly to acrylic aka plexiglass and would either not stay together for any amount of time or would fall apart eventually).
AmityvilleHams is offline   Reply With Quote
Old 11-15-2017, 12:13 PM   #3
CMB
PM Fluffy for custom title
 
Join Date: Jan 2016
Location: Hertfordshire - UK
Posts: 2,620
Default Re: 2017 DIY Cage Project, Mounting Plexy?

Would it be possible to cut a groove the same width as the plexi in the base and sides. This way the plexi could be put into the side grooves and slide down and go into the groove in the base?

I have seen a bracket on a diy hamster cage video that held glass/ plexi front in place.

There are square U shaped strips (like what vivariums have for the glass doors to fit into). They could work in a similar way to cutting grooves.
CMB is online now   Reply With Quote
Old 11-18-2017, 09:46 PM   #4
climber008
Adult Hamster
 
climber008's Avatar
 
Join Date: Nov 2015
Location: United States
Posts: 281
Default Re: 2017 DIY Cage Project, Mounting Plexy?

On my cage that I built (a melamine plank and plexiglass structure), I used a pet-safe non-toxic aquarium sealant to adhere the glass directly to the board.

After it was dry, I scraped all the excess from the side.
__________________
http://www.hamstercentral.com/community/image.php?type=sigpic&userid=28418&dateline=145204  3134
Pringle Pet Instagram
climber008 is offline   Reply With Quote
Old Yesterday, 05:42 PM   #5
Cricetinae
Hamster Pup
 
Cricetinae's Avatar
 
Join Date: May 2013
Location: West Midlands, UK.
Posts: 95
Default Re: 2017 DIY Cage Project, Mounting Plexy?

Quote:
Originally Posted by climber008 View Post
On my cage that I built (a melamine plank and plexiglass structure), I used a pet-safe non-toxic aquarium sealant to adhere the glass directly to the board.

After it was dry, I scraped all the excess from the side.
Oh really? Was the side you adhered the board to covered in the white surface? I assumed it wasn't pourous enough, and that you'd need to sand it or otherwise 'rough it up'. Were you able to see the sealant through the clear plexy, or was it transparant?

Thanks for your insight, and everyones ideas.
__________________
Cricetinae is offline   Reply With Quote
Old Yesterday, 06:03 PM   #6
AmityvilleHams
PM Fluffy for custom title
 
Join Date: Mar 2016
Posts: 3,605
Default Re: 2017 DIY Cage Project, Mounting Plexy?

It isn't that the melamine isn't porous(or even the melamine at all),it's that acrylic and silicon sealants simply don't work well together and can't stay bonded Acrylic(what plexiglass actually is)just doesn't bond to silicon(aquarium sealant)so it never forms a completely permanent seal.

The best you could do with aquarium sealant is keep liquids from coming out,but it wouldn't permanently keep acrylic in place.You'd still want to attach the acrylic itself to the melamine otherwise you could end up with things falling apart eventually!
AmityvilleHams is offline   Reply With Quote
Reply

Tags
plexy, face, mount, chipboard, drilling, cage, flush, diy, edge, melamine, 15mm, overhang, aesthetics, worried, ruin, side, 30mms, longer, ~20mm, safer, length, sand, brackets, found, similar

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright 2003-17, Hobby Solutions Inc.
All times are GMT -7. The time now is 11:35 AM.