A Permanent solution to fixing the Savic Rolly Hamster Wheel...

[Dougal_Ham]

Hi All,

So I don't know about you but I am fed up with the spindle on the Savic Rolly wheel constantly breaking...

SO...

I decided to work on a solution...

As the picture demonstrates... The solution uses 5 key components...

I have put these kits together as a pack and will post on the Marketplace later this evening.

xx.

[racinghamster]

Wonderful solution you created there Dougal Ham and would also fix the wheel to a Roly wheel stand aswell since the metal stand has bars on it for the wheel to attach to, so whether the wheel was attached to the actual cage bars, or to it`s stand, this method should work well on both.

[souffle]

Thanks for doing this illustration on how to do this I've stickied it for future ref.
If you want to put the packs of items needed plus cost and postage on marketplace if anyone want to buy one they can go there

[Dougal_Ham]

Originally Posted by souffle

Thanks for doing this illustration on how to do this I've stickied it for future ref.
If you want to put the packs of items needed plus cost and postage on marketplace if anyone want to buy one they can go there

Thank you

I will work on costings this evening and put the packs up on Marketplace.

Here is how it all looks when put together on the cage / stand.

I would just like to add that this DOESN'T squeak and because of the washer / base plate, it DOESN'T bang against the cage base either!!

Jess. xx.