My approach to a bin cage.....

[morganel88]

So…. After the loss of my Negrito, I decided that I wanted a fresh start and wanted to try out having a new species of hamster along with DIYing my own cage as here in France (well Paris) the cages are not very big. From there I went to Hamster Hideout to learn everything about bin cages and robo hamsters as that will be my next choice, so I thought that I would photograph all of my progress of the cage, from getting the materials all the way to the completed cage and maybe even the choosing of our new robos.

After plenty of debate with myself, getting opinions on Hamster Hideout and from some of the people that I follow and follow me on Instagram, I decided that I would go for the IKEA Salma box as the basis of the bin cage and from there I bought the rest of the materials that I needed to make and cover the holes that I planned to make in the bin along with all the stuff needed to make as many of the toys that I could by hand. Here in the pictures below are all the materials and the box:

http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-08/d2c3ae99-acac-42c3-9e13-3213d5801ebf.jpg http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-08/27272aa0-0ab8-45ad-97a4-f2dc29f94941.jpg

Before I get on to all the photos of the progress of the bin, I thought that I would take a moment to show the things that I have made along with the information about where I got instructions to make them. Overall I have made 2 bridges, a swing, a mini second level for them to access the water bottle and a sand bath for them. The second level and the sand bath I made myself but the bridges and the swing I followed instructions on YouTube:

The Bridges: https://www.youtube.com/watch?v=_3lqRdpSRXw
The Swing: https://www.youtube.com/watch?v=fj3qF5HwUjg

I also have lots of toilet and kitchen rolls to put in their cage too along with their wheels, one each and both purple. The only thing that I had left if to make or buy their houses…. I did attempt to make one but it went badly so I bought them instead…. Here is a picture of what I have made (I am proud of these I have to admit as I am usually rubbish at DIY):

http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-08/76d4623e-7983-49e4-a894-397cc45c1455.jpg http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-08/ffea5700-f059-4f4f-8cb9-4bb3204fe5a5.jpg

Now to the box, I loved the idea of being different as it is my first ever cage and I am rubbish at straight lines I decided that I would go for circles…… I ended up doing 11!!!!! I wanted to make sure that they have enough ventilation going throughout the cage but not affecting the space that they have inside or preventing me giving them enough bedding to run around and dig into. In the pictures below you will see the progress that I made from measuring them out to cutting the holes themselves….

http://i32.photobucket.com/albums/d23/swerdna_eiluj/BinCage1-1.jpg http://i32.photobucket.com/albums/d23/swerdna_eiluj/BinCage2-1.jpg

After about over 100 cables ties and shredded hands from pulling them tight to ensure no baby robo could escape this is what the final product looked like:

http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-09/8a9e59b4-ee8f-4ff5-a1bb-00d1cfc1def6.jpg

You will see that the cable ties are a different colour to the mesh. I wanted them to blend into the plastic box to avoid them being chewed and for the moment that has worked!

During this process I went back to the UK for a wedding and definitely used it as an excuse to buy lots of things for the new robos that I was going to get upon my return, things that are not easily found in France and things that are much cheaper in the UK so this is a pic of the final things for the cage:

http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-09/326db40e-249d-4995-ac47-19f1ab0091ef.jpg

The night before I got my girls (I have had them almost 6 weeks now) I set up the cage so that it would be one less thing to do when I got them... Remembering from last time the pain of having to set up a cage while having a scared little hamster in a box next to you.... This was the original set up (I have cleaned the cage since then and moved everything all about):

http://i32.photobucket.com/albums/d23/swerdna_eiluj/Mobile%20Uploads/2014-09/2613b6bc-9c95-4c51-aa62-ecd5c3494741.jpg

So that is my adventure in making my own bin cage for my robos and they love it! If you want to know anything about how I made it then feel free to ask :)

[dave123791]

Wow, that looks really nice. I love tutorials that have lots of details and pictures in them- this is perfect. Just out of interest: what did you use to cut out the holes? And the mesh?

[morganel88]

Thanks dave123791, I enjoy them too as I am a visual yet practical person :)

To cut the mesh I used scissors, it isn't a strong one but they can't bite through it and to cut the holes in the box to avoid cracks I used a soldering iron..... For this I would definitely recommend doing it outside or with windows open and at least 2 masks on your face as the smell is unreal! But as it avoids cracks it is worth it!

[dave123791]

Thanks dave123791, I enjoy them too as I am a visual yet practical person :)

To cut the mesh I used scissors, it isn't a strong one but they can't bite through it and to cut the holes in the box to avoid cracks I used a soldering iron..... For this I would definitely recommend doing it outside or with windows open and at least 2 masks on your face as the smell is unreal! But as it avoids cracks it is worth it!

Have you thought about using an angle grinder??

I used it for both- cutting the mesh and the box. (i have 2 bin cages). It would be a bit difficult for cutting out circles though.

[cypher]

That looks really good, great job & really clear showing how you did it too.
I bet your hams love it!

[becky1412]

Wow! Love it! I guess this sounds really stupid but I love the circles instead of the rectangles good job! Love the little homemade toys too :)

[morganel88]

Have you thought about using an angle grinder??

I used it for both- cutting the mesh and the box. (i have 2 bin cages). It would be a bit difficult for cutting out circles though.

I guess I would have gone down that route if I went with squares (my original idea) and if I ever make another bin cage I might go down that route.... I was more scared of breaking the box and despite the smell melting the plastic did make some very good shapes. For me cutting the "circles" out of the mesh was the more complicated bit.... some of them are very just but as they are out of the way of the hamsters I am not worried there :)

[BrainGirl]

Wow, great design! I agree that melting the plastic is an easier way to go when you want nice, smooth curves. When I installed a stereo system in my first car I used a wood burning tool from an art kit I was given to make holes for the 6 x 9 oval speakers in the back. Worked great, but the smell was overwhelming and the wood burning tool didn't survive:rolleyes: A soldering iron would be much more durable for the task:)

[morganel88]

Good old wood burning tools.... that brings back memories and I can imagine it not surviving after that and yes a soldering iron survives much better.... it is like nothing happened to it!

Thanks people for the compliments, I do feel like all of my hard work did pay off in the end and I enjoyed making it too..... now to convince the SO for a Syrian and then I get to customise the two cages I have left over!

[Skeever]

Yay for NO STRAIGHT LINES!!!! Great tutorial!

Now, have you made another one if you have a pair? In case the hams fall out, a second cage on hand is a must. :D

[Esmy]

Very nice, love the circles! They would probably be easier to cut with tin snips (what I used) than trying to make a straight line like I did.

[morganel88]

I am happy that people enjoy my cage, it is definitely being loved by my two robos as they have all the space they need and I don't need to worry about them not having enough air circulating or escaping :)

[DrKMcK]

Count me in as another person who love what you've done :-D. Great work and I loved the video links. Your hammies have a wonderful home. :-D

[wagawiggle]

Where did you get your wire mesh from? By the way amazing cage! Certainly gave me some ideas!

[morganel88]

Yay for NO STRAIGHT LINES!!!! Great tutorial!

Now, have you made another one if you have a pair? In case the hams fall out, a second cage on hand is a must. :D

I have my old cages from my previous hamsters so if anything was to happen I can freely separate them not problem at all but they seem to love being together and bar a few squabbles over food there has been nothing. Lucky isn't the word!

I am glad people are enjoying it, the mesh I bought from a DIY store here in Paris so should be easy enough to find, I went for the smallest holes that I could find which would still give them ventilation (there are smaller but I was scared that they wouldn't get enough air)

[morganel88]

Yay for NO STRAIGHT LINES!!!! Great tutorial!

Now, have you made another one if you have a pair? In case the hams fall out, a second cage on hand is a must. :D

I have my old cages from my previous hamsters so if anything was to happen I can freely separate them not problem at all but they seem to love being together and bar a few squabbles over food there has been nothing. Lucky isn't the word!

I am glad people are enjoying it, the mesh I bought from a DIY store here in Paris so should be easy enough to find, I went for the smallest holes that I could find which would still give them ventilation (there are smaller but I was scared that they wouldn't get enough air)