Hamster Central - View Single Post

don · 12-05-2015, 05:20 AM

I've done just that.

Remove the 2 screws that secure the base, then I pointed the 'upright' upwards.
The tricky but is offering it up to the cage as it can be fiddly.

I then used 3 short wood screws, with some large flat washers on the outside of the bars to clamp around the bars and hold it solid.
I also but a small length of rubber strip clamped between the bar and the washer for maximum rattle prevention. I'm not sure that last bit was necessary but I had some at hand so I did it anyway.

I think it's fantastic, I'll pop a photo up later.

12-05-2015, 05:20 AM
don Hamster Pup Join Date: Nov 2015 Posts: 68	Re: Attaching Karlie Wonderland to the cage? I've done just that. Remove the 2 screws that secure the base, then I pointed the 'upright' upwards. The tricky but is offering it up to the cage as it can be fiddly. I then used 3 short wood screws, with some large flat washers on the outside of the bars to clamp around the bars and hold it solid. I also but a small length of rubber strip clamped between the bar and the washer for maximum rattle prevention. I'm not sure that last bit was necessary but I had some at hand so I did it anyway. I think it's fantastic, I'll pop a photo up later.