Hamster Central - View Single Post

racinghamster · 09-25-2015, 12:53 AM

Hi JellyBeans, I agree about splitting the Detolf and adopting a single robo to live in the other section. The last two single robos I had both used my Gabber Rex Perspex tank, which is roughly the same size as a Zoozone 1 to give you an idea and it was big enough. Better than a Ferplast Duna which is on the small side.

One thing I would say is, decide how you are going to divide the Detolf and make sure it is very, very secure and can`t be dug under. I`m not sure if these units have sliding glass shelves that can be slid back in and then siliconed or fixed some how, or whether you would need to use a piece of sheet metal or even plywood? Do you know how you will go about doing the splitter? x

09-25-2015, 12:53 AM
racinghamster PM Fluffy for custom title Join Date: Jul 2006 Location: Central Scotland Posts: 13,415	Re: Small cage for robos? Hi JellyBeans, I agree about splitting the Detolf and adopting a single robo to live in the other section. The last two single robos I had both used my Gabber Rex Perspex tank, which is roughly the same size as a Zoozone 1 to give you an idea and it was big enough. Better than a Ferplast Duna which is on the small side. One thing I would say is, decide how you are going to divide the Detolf and make sure it is very, very secure and can`t be dug under. I`m not sure if these units have sliding glass shelves that can be slid back in and then siliconed or fixed some how, or whether you would need to use a piece of sheet metal or even plywood? Do you know how you will go about doing the splitter? x __________________ Get A Life, Get A Rodent!